Panasonic SX-KN7000 Musical Instrument User Manual


 
MULTI EFFECT SET
You can select other types that can be set with
MULTI. Select the types by pressing this button.
If a type other than a VOCAL group type is
selected, the normal REVERB, not the MIC
REVERB, may be applied. In this case, the
effect does not change even if the MIC RE-
VERB setting is adjusted.
Controller
Use the controllers (left next to the keyboard) to change the nuance of the sound while you are playing.
PITCH BEND
The pitch of the instrument can be continuously
changed with the PITCH BEND wheel at the left
end of the keyboard. Using this control, you can
produce the effect of bending the strings on a
guitar.
While pressing a key on the keyboard, move the
wheel up and down to control the pitch.
When you release your hand from the wheel,
it returns automatically to the center position
and the pitch bend effect is turned off.
The pitch bend effect does not function for the
AUTO PLAY CHORD accompaniment pattern
or during a normal performance for the sounds
of the LEFT part.
The amount of pitch bend can be set. (Refer
to page 154.)
MODULATION
The MODULATION wheel is used to apply a vi-
brato effect, for example, to the sound.
While pressing a key on the keyboard, move the
wheel up to add the effect.
When this effect is not needed, set the MOD-
ULATION wheel to the MIN position.
This effect differs depending on the selected
sound.
The vibrato effect does not function for the
AUTO PLAY CHORD accompaniment pattern
or during a normal performance for the sounds
of the LEFT part.
PITCH BEND
UP
DOWN
MODULATION
MAX
MIN
Sounds and effects
Part I Sounds and effects
46
QQTG0671