Filter
Top Products
PANEL MEMORY mode
You can define which panel settings are recalled
when the PANEL MEMORY is used.
1. Press and hold the SET button for a few sec-
onds.
• The display changes to the following.
2. Select the mode.
NORMAL:
The sounds and volume balance, and CON-
DUCTOR status are stored.
EXPAND:
All the instrument’s settings are stored, includ-
ing the rhythm (except for SOUND AR-
RANGER on/off status), TRANSPOSE,
tempo, etc.
• After a few seconds, the display exits the set-
ting mode.
EXPAND MODE FILTER
You can specify which data is stored in the EX-
PAND mode.
1. Use the PAGE buttons to access the PAGE
2/2 EXPAND MODE FILTER display.
• The display looks similar to the following.
2. Use the ∧ and ∨ buttons to select the item.
3. Use the ON and OFF buttons to store the on
or off status for the selected item.
CUSTOM PANEL
In addition to the regular PANEL MEMORY, this
feature lets you store a favorite panel setup to
recall any time by the press of a button.
Even if the PANEL MEMORY data is changed
when an automatic setting function is activated
or the disk data load procedure is performed, for
example, simply by pressing this button, your
favorite panel setings are instantly restored.
1. Set up the instrument with your favorite set-
tings.
2. Press the SET button and the CUSTOM
PANEL button at the same time.
• “COMPLETED!” is shown on the display.
• The stored settings are recalled whenever you
press the CUSTOM PANEL button to turn it
on.
• The stored contents are retained even when
the power to the instrument is turned off.
• You can select the range of settings that are
included in the CUSTOM PANEL function.
(Refer to page 185.)
CUSOMIZE
FAVORITES
CUSTOM
PANEL
NEXT BANK
PANEL MEMORY
BANK VIEW
7
85
14
6
23
SET
Playing the rhythm
Part II Playing the rhythm
67
QQTG0671