Filter
Top Products
Mixer
Use the MIXER display to visually adjust the major settings of each part. Use this display to make broad,
general changes to the settings.
1. On the SOUND MENU display, select MIXER.
• The MIXER display consists of 5 pages. Use
the PAGE buttons to switch among the pages.
• Each time the OTHER PARTS/TR button is
pressed, the part that is displayed changes.
2. Adjust each parameter.
SOUND:
Select SOUND. Use the buttons below the dis-
play to set the sound for the corresponding
part.
• The buttons in the SOUND GROUP can also
be used to select the sound.
PAN:
Select PAN. Use the buttons below the display
to adjust the stereo balance of the correspond-
ing part (L64– CTR– R63).
VOLUME:
Select VOLUME. Use the buttons below the
display to adjust the volume of the correspond-
ing part (0 to 127).
• To mute a part, press both the corresponding
balance buttons as the same time. To cancel
the mute, press either balance button for the
part.
REVERB:
Select REVERB. Use the buttons below the
display to set the level of the REVERB for the
corresponding part (0 to 127).
DIGITAL EFFECT:
Select DIGITAL EFF. Use the buttons below
the display to set the DIGITAL EFFECT to ON
or OFF for the corresponding part.
SOUND DSP:
Select SOUND DSP. Use the buttons below
the display to set the SOUND DSP to ON or
OFF for each part.
SOUND DSP DEPTH:
Select SOUND DSP DEPTH. Use the buttons
below the display to adjust the depth of the
SOUND DSP for the corresponding part (0 to
127).
CHORUS:
Select CHORUS. Use the buttons below the
display to set the CHORUS to ON or OFF for
each part.
CHORUS DEPTH:
Select CHORUS DEPTH. Use the buttons
below the display to set the depth of the
CHORUS for the corresponding part (0 to
127).
MULTI:
Select MULTI. Use the buttons below the dis-
play to set the MULTI to ON or OFF for each
part.
MULTI DEPTH:
Select MULTI DEPTH. Use the buttons below
the display to adjust the depth of the MULTI
for the corresponding part (0 to 127).
Sound
Part VIII Sound
157
QQTG0671