Filter
Top Products
FADE OUT
At the end of the song, the volume of each part
gradually fades to nothing.
1. Start the performance.
2. Turn on the FADE OUT button at the point you
want the fade-out to start.
• The volumes of all the parts slowly fade to 0.
• The indicator flashes to show that fade-out is
completed, and then goes out. The volumes
for all parts return to their specified settings.
• If you wish to interrupt the fade-out, press the
FADE OUT button to turn it off.
FADE SET
Adjust the settings for the FADE IN and FADE
OUT.
1. Press and hold the FADE IN or FADE OUT
button for a few seconds.
• The display looks similar to the following.
2. Use the ▲ and ▼ buttons to select the item.
Use the ∧ and ∨ buttons to change the setting.
FADE IN
Time:
Specify the time elapsed between 0 volume
to the set volume (1 measure to 16 mea-
sure).
FADE OUT
Time:
Specify the time elapsed between the set
volume and 0 volume (1 measure to 16
measure).
Auto Reset:
Specify whether the volume of each part
automatically returns to its specified setting
(ON, OFF).
Rhythm Auto stop:
Specify whether the rhythm turns off after
fade-out is completed (ON, OFF).
SEQ Auto stop:
Specify whether the SEQUENCER play-
back automatically stops after fade-out is
completed (ON, OFF).
• The display returns to the previous display a
few seconds after you have changed the set-
tings.
• You can also access this display from the
CONTROL MENU display. (Refer to page
178.)
IN OUT
FADE
IN OUT
FADE
Playing the rhythm
Part II Playing the rhythm
59
QQTG0671