Filter
Top Products
MEASURE ERASE
Erase the recorded contents of specific meas-
ures.
• Note that only the contents of the measures
are erased, not the measures themselves; the
length of the performance remains the same.
1. Use the PART ∧ and ∨ buttons to specify the
part.
• If ALL is selected, data is erased from the
specified measures of all the parts at one time.
2. Use the FIRST MEASURE ∧ and ∨ buttons
to specify the start point (measure number).
3. Use the LAST MEASURE ∧ and ∨ buttons to
specify the end point (measure number).
4. Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
MEASURE DELETE
Delete specified measures from all parts at once.
• The length of the performance accordingly
decreases by the number of deleted meas-
ures.
1. Use the FIRST MEASURE ∧ and ∨ buttons,
to specify the first measure to delete.
2. Use the LAST MEASURE ∧ and ∨ buttons to
specify the last measure to delete.
• One measure is the smallest unit that can be
deleted.
3. Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
• When the INTRO or ENDING measures are
deleted, the Maj and Min data are erased at
the same time.
MEASURE INSERT
Insert blank measures at a specified point.
• The length of the performance accordingly in-
creases by the number of inserted measures.
1. Use the FIRST MEASURE button to select the
point (measure) where the measures are to
be inserted.
2. Use the NUMBER OF MEASURE button to
select the number of blank measures to insert.
• No more than 16 measures total can be in-
serted.
3. Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
• The Maj or Min data is inserted in the INTRO
and ENDING at the same time.
Composer
Part V Composer
118
QQTG0671