Filter
Top Products
SEQUENCER VOLUME
When playing the keyboard along with a recorded
performance, you can adjust the total volume of
all the playback parts as one.
Use the APC/SEQUENCER VOLUME slide con-
trol to adjust the volume.
• Use this control to lower the volume of the
recorded playback parts when it is too loud
relative to the volume of your manual perform-
ance.
• The volume of all sounds other than your
manual performance— including PERFORM-
ANCE PADS, MIDI input, etc.— is lowered.
• At the MAX position, the volume of the play-
back parts correspond to their current settings;
at the OFF position, the volume is 0.
• The volume can be adjusted for each part.
(Refer to page 29.)
• Except during SEQUENCER playback or
DIRECT PLAY of a disk, this slide control
adjusts the total volume of all the automatic
accompaniment parts.
• During SEQUENCER recording, the volume is
automatically at its maximum regardless of the
position of the slide control. During playback,
however, lowering the slide control from the
MAX position will lower the volume from its
recorded level. For this reason, the slide con-
trol should normally be left in the MAX posi-
tion.
Naming
Here is the way to assign a name to your recorded song.
1. On the SEQ MENU display use the SONG
SELECT ∧ and ∨ buttons to select a song.
2. Press the NAMING button.
• The display looks similar to the following.
3. Use the buttons below the display to assign a
name.
• Press the ABC button to enter alphabetical
characters. While the SHIFT button is
pressed, upper case letters are entered.
• Press the 123 button to enter numbers, etc.
While the SHIFT button is pressed, you can
enter symbols.
• Press the POSITION button to move the cur-
sor.
• You can also use the TEMPO/PROGRAM dial
to select the characters.
• Press the INS button to enter a space at the
cursor position.
• Press the DEL button to erase the character
at the cursor position.
• Press the CLR button to erase the entire
name.
• Press the →← button to center the name.
4. Press the OK button.
APC/SEQUENCER
VOLUME
MAX
MIN
Sequencer
Part IV Sequencer
85
QQTG0671