Support User Manuals

Panasonic SX-KN7000 Musical Instrument User Manual

Open as PDF

of 211

Part Setting

Follow this procedure to set the functions which can be set for each part: MIDI CHANNELs, the OCTAVE

data to NOTE data during transmission, and LOCAL CONTROL (whether or not the sound generator of

this instrument is active during transmission).

1. On the MIDI MENU display, select PART SET-

TING.

• The display looks similar to the following.

2. Use the PART ▲ and ▼ buttons to select a

part.

• The list of parts covers 4 pages. Use the

OTHER PARTS/TR button or PAGE button to

view different parts.

3. Use the CHANNEL ∧ and ∨ buttons to select

a MIDI CHANNEL for the part (OFF, 1 to 16).

• A part which has been set to OFF cannot be

used to transmit or receive MIDI data.

• The initialized settings are as follows:

RIGHT 1 1

RIGHT 2 2

LEFT 3

PART 1 OFF

PART 2 OFF

PART 3 OFF

PART 4 4

PART 5 5

PART 6 6

PART 7 7

PART 8 8

PART 9 9

PART 10 10

PART 11 11

PART 12 12

PART 13 13

PART 14 14

PART 15 15

PART 16 16

CONTROL OFF

ACCOMP 1 – 5OFF

BASS OFF

DRUMS 1 – 2OFF

CHORD OFF

4. Use the OCTAVE ∧ and ∨ buttons to set the

octave shift value (– 3 to 3).

• Octave shift is set for transmitted data only;

however the transmitted and received octave

shifts are linked. For example, if the trans-

mitted octave shift is set to 1, the received

octave shift is automatically set to – 1.

5. Use the LOCAL ∧ and ∨ buttons to enable or

disable this instrument’s sound generator.

• When set to ON, the performance from this

instrument is transmitted as MIDI data and

also sounds from this instrument. When set to

OFF, the performance from this instrument is

transmitted as MIDI data but does not sound

from this instrument.

6. Repeat steps 2 to 5 for each part as desired.

MIDI

Part XIII MIDI

190

QQTG0671

previous next