Filter
Top Products
113
Creating a Patch
Overview Connections VS-700C Console VS-700R I/O Fantom VS Appendix
Patch TVA
Tone Level
★
Sets the volume of the tone. This setting is useful primarily for
adjusting the volume balance between tones.
Value:
0–127
Level V-Curve (TVA Level Velocity Curve)
You can select from seven curves that determine how
keyboard playing strength will affect the volume. If you do
not want the volume of the tone to be affected by the force
with which you play the key, set this to “FIXED.”
Value:
FIXED, 1–7
fig.06-036
Level V-Sens (TVA Level Velocity Sensitivity)
Set this when you want the volume of the tone to change
depending on the force with which you press the keys. Set
this to a positive (+) value to have the changes in tone
volume increase the more forcefully the keys are played; to
make the tone play more softly as you play harder, set this to
a negative (-) value.
Value:
-63– +63
If you wish to make adjustments to the entire patch
while maintaining the relative values of TVA Level
Velocity Sensitivity among tones, adjust the Velocity
Sens Offset parameter (p. 99). However, this setting is
shared by the Cutoff V-Sens parameter (p. 111).
Bias Level
Adjusts the angle of the volume change that will occur in the
selected Bias Direction. Larger settings will produce greater
change. Negative (-) values will invert the change direction.
Value:
-100, -90, -80, -70, -60, -50, -40, -30, -20, -10, 0,
+10, +20, +30, +40, +50, +60, +70, +80, +90, +100
Bias Position
Specifies the key relative to which the volume will be
modified.
Value:
C-1–G9
Adjusting the Volume (TVA/TVA Env)
1234567
Bias
Bias causes the volume to be affected by the keyboard
position. This is useful for changing volume through
keyboard position (pitch) when playing acoustic
instruments.
fig.06-039.e
C-1 G9
+
0
–
C-1 G9
+
0
–
C-1 G9
+
0
–
C-1 G9
+
0
–
+
0
–
+
0
–
LOWER
LO&UP
UPPER
ALL
Bias Position
Level
Level
Level
Level
Key
Key
Key
Key
Bias Position
Bias Position
Bias Position
VS-700_r_e.book 113 ページ ２００８年１１月２０日 木曜日 午後２時２８分