Filter
Top Products
20
Panel Descriptions
E. SAMPLE RATE Knob
This specifies the sample rate. In order for this setting to be reflected by the system, you must cycle the power to the
VS-700R. If you need to synchronize with another digital device, you must first set this knob to the same sample rate
as the master device.
➔
“Switching the Sampling Rate”
(p. 80)
F. SYNC Indicator
This indicates the audio clock status.
➔
“Audio Clock Source”
(p. 82)
G. INPUT Indicators
These indicate the input levels from the INPUT connectors and AUX connectors.
If PEAK has lit, the sound has distorted.
If the cooling fan (p. 24) has stopped turning because of a malfunction, all indicators will blink. For details,
refer to
“Troubleshooting”
(p. 171).
H. MONITOR MAIN Indicators
These will light when audio signals are output from MONITOR MAIN.
MONITOR SUB Indicators
These will light when audio signals are output from MONITOR SUB.
I. OUTPUT 1–10 Indicators
These will light when audio signals are output from OUTPUT 1–10.
J. POWER ON Switch
Press this to turn the power on/off.
➔
“Turning the Power On”
(p. 28)
K. Rackmount brackets
If you want to install the system in a 19” rack, attach the included rackmount brackets.
➔
“Attaching the Rackmount Brackets”
(p. 163)
VS-700_r_e.book 20 ページ ２００８年１１月２０日 木曜日 午後２時２８分