Filter
Top Products
16
Panel Descriptions
C. Time Display
The VS-700C Console displays the project’s current Now time in the top right corner. You can switch the display
between SMPTE and Bars|Beats time by pressing the [TIME CODE] button. The default view is Bars|Beats.
➔
“Time Display”
(p. 48)
D. CHANNEL STRIP CONTROL Section
The CHANNEL STRIP CONTROL section lets you control EQ and SEND parameters for the selected channel strip, as
well as ACT parameters for the track, bus, effect plug-in or soft synth that has focus in SONAR.
There are 12 rotary encoders and 4 buttons to control EQ, SEND and ACT parameters.
➔
“CHANNEL STRIP CONTROL Section (EQ, SEND and ACT)”
(p. 49)
E. ACCESS PANEL Section
The ACCESS PANEL section provides 16 assignable buttons that you can configure to control different functions in
SONAR. There are also 4 modifier buttons that are used to extend the functionality of other VS-700 hardware
controls. The modifier buttons are not assignable.
➔
“ACCESS PANEL Section (Assignable Buttons)”
(p. 64)
F. Channel Strips
The Channel Strip section provides eight motorized fader strips with identical controls. You use the channel strips to
control up to eight tracks or buses at a time and you can easily switch between different banks of tracks or buses.
➔
“CHANNEL STRIP Section”
(p. 31)
G. RECORD/EDIT Section
The RECORD/EDIT section lets you control punch-recording and looping, select clips or edit regions, and insert or
move markers.
➔
“RECORD/EDIT Section”
(p. 71)
H. Transport Section
The transport section provides standard control of RTZ (return to zero), Rewind, Fast Forward, Go to end, Stop, Play
and Record.
➔
“Transport Section”
(p. 54)
I. AUDIO OUTPUT Section
The AUDIO OUTPUT section lets you control the volume of the MONITOR output and each headphone output. You
can also mute the MONITOR output and assign each headphone to monitor the MAIN/SUB output.
➔
“AUDIO OUTPUT Section”
(p. 70)
VS-700_r_e.book 16 ページ ２００８年１１月２０日 木曜日 午後２時２８分