Filter
Top Products
39
CHANNEL STRIP Section
Overview Connections VS-700C Console VS-700R I/O Fantom VS Appendix
The illustration below shows how the parameter will be switched if FADER VIEW is set to TRACK.
fig.9.eps
1.
Pan (default display)
2.
Send Volume/Chorus Send
3.
Input
4.
Output
When FLIP mode is enabled, the [ASSIGN] button is disabled, regardless of which FADER VIEW type is selected. In FLIP
mode, the faders and rotary encoders swap functions.
When [SHIFT]+[FLIP] buttons are pressed, the values of the faders are shown on the LCD display, but the faders and
rotary encoders do not swap functions.
How FLIP Mode Affects the [ASSIGN] Button
Bass1 Guitar1 Drum01 Encoder
30% R 25% L C Pan
Bass1 Guitar1 Drum01 Encoder
0dB 0.5dB -9.0dB Send Vol
Bass1 Guitar1 Drum01 Encoder
-7001-2 -7003-4 -7005-6 In
Bass1 Guitar1 Drum01 Encoder
Master Master Bus1 Out
1
3
4
2
VS-700_r_e.book 39 ページ ２００８年１１月２０日 木曜日 午後２時２８分