Filter
Top Products
158
Installing the ARX Expansion Board
To remove an expansion board, reverse the process by which you inserted it.
1.
Unlatch the latched board holders.
fig.attach08.eps
2.
Verify that the two latched board holders are unlocked, then gently pull up the board and
disconnect the connector.
fig.attach09.eps
3.
Disengage the board from the non-latched board holders, and remove the board.
4.
Attach the cover by reversing step 2 of the installation process.
Removing an Expansion Board
VS-700_r_e.book 158 ページ ２００８年１１月２０日 木曜日 午後２時２８分