Filter
Top Products
51
CHANNEL STRIP CONTROL Section (EQ, SEND and ACT)
Overview Connections VS-700C Console VS-700R I/O Fantom VS Appendix
The LCD display above the CHANNEL STRIP CONTROL section shows EQ, SEND and ACT information for the selected
channel strip, depending on which mode is selected.
The CHANNEL STRIP CONTROL section contains four rows of controls; three rows of knobs and one row of buttons.
Only one row at a time can be shown on the LCD display.
To specify which row of controls to show on the LCD display:
Press the [DISPLAY] button. The LEDs above the [DISPLAY] button indicate which row of controls is shown on the LCD
display.
fig.24.eps
A.
[DISPLAY] button (Selects which row displays parameters on the LCD display)
EQ mode lets you control the per-channel EQ for the selected channel strip.
To Enable EQ Mode
Press the [EQ] button. The [EQ] button is lit when enabled.
In EQ mode you can control the four-band EQ. You can control the following parameters for each band.
fig.25.eps
A.
Band gain
B.
Band frequency
C.
Band shape (Q)
D.
Band enable/disable
LCD Display
EQ Mode
A
A
B
C
D
VS-700_r_e.book 51 ページ ２００８年１１月２０日 木曜日 午後２時２８分