Filter
Top Products
85
Overview Connections VS-700C Console VS-700R I/O Fantom VS Appendix
Compressor Parameters
Digital compressors are built into the eight audio inputs (INPUT 1–8).
If you’re using SONAR, you can edit the compressor parameters as described below.
If you’re using software other than SONAR, use “VS-700R I/O Editor” which is included on the “SONAR V-
STUDIO 700 CD-ROM.”
1.
From SONAR’s “Tools” menu, open “VS-700.”
2.
Select the “MIC PRE” tab.
3.
Apply the desired compressor settings.
These settings are not stored in the VS-700.
You can use the channel strip rotary encoders to control the Mic Pre Gain, Threshold ,Attack and Release
parameters on the VS-700R I/O. For details, refer to
“I/O Control”
(p. 44).
Setting
Screen label Range Default Explanation
Comp switch
COMP OFF, ON OFF Enables the compressor.
Threshold THRES -60–0 dB -20 dB
Specifies the signal level at which the compressor
will be applied.
Ratio RATIO
1:1.0,
1:1.1,
1:1.2,
1:1.4,
1:1.6,
1:1.8,
1:2.0,
1:2.5,
1:3.2,
1:4.0,
1:5.6,
1:8.0,
1:16,
1:INF
1:4.0
Specifies the compression ratio by which the
audio signal will be compressed.
Attack time ATK 0–100 Actual value (0.2–100 ms)
Release time REL 0–100 Actual value (10–500 ms)
Gain GAIN -30–30 dB 0 dB Adjusts the output level of the compressor.
VS-700_r_e.book 85 ページ ２００８年１１月２０日 木曜日 午後２時２８分