Filter
Top Products
170
About V-LINK
Settings for SONAR
Insert a MIDI track somewhere other than in the project, and make the following driver settings for the input and
output. Next, turn on
the [Input Echo] button of the MIDI track. Once set up this way, you’ll be able to record and
play back V-LINK data in SONAR.
Turning the V-LINK ON/OFF
1.
In the left of the panel, press [V-LINK] so the indicator is lighted.
The V-LINK setting will be on.
When the V-LINK button is lighted, you’ll be able to carry out video control in keeping with operations performed on
the VS-700C.
When V-LINK is switched on, the Video Control function (p. 168) is turned off, and the [VIDEO CTRL] button
will function on behalf of the V-LINK feature (switching video clips).
2.
Press [V-LINK] again.
The V-LINK button will go out, and the V-LINK setting will be off.
V-LINK Parameters
Port Driver
MIDI Input V-LINK (VS-700)
MIDI Output IO MIDI (VS-700)
VS-700C Controller V-LINK Control Transmitted MIDI Message
FR BALL Image Switching (Clip Switching) C0 00
ACT Image Switching (Clip Switching) C0 01
X-RAY Image Switching (Clip Switching) C0 02
VIDEO CTRL Image Switching (Clip Switching) C0 03
PUNCH Image Switching (Clip Switching) C0 04
LOOP Image Switching (Clip Switching) C0 05
SNAP Image Switching (Clip Switching) C0 06
|> Image Switching (Clip Switching) C0 07
<| Image Switching (Clip Switching) C0 08
SET Image Switching (Clip Switching) C0 09
MAKER Image Switching (Clip Switching) C0 0A
VIEW Image Switching (Clip Switching) C0 0B
JOG Video Control, Video Bank Select B0 00 00-13
T-BAR Video Control B0 0B 00-7F
JOYSTIC-Y Video Control, Color Cr Control B0 47 00-7F
LFE SEND Video Control B0 49 00-7F
JOYSTIC-X Video Control, Brightness Control B0 4A 00-7F
SHUTTLE Video Control, Playback Speed E0 00 00/20 00/40 00/00 10/00 30/00 40/40 40/00 50/00 60/00 70/7F 7F/
V-LINK Mode Switching
F0H 41H 10 00H 51H 12H 10H 00H 00H 01H 6F F7H
F0H 41H 10 00H 51H 12H 10H 00H 00H 00H 70 F7H
VS-700_r_e.book 170 ページ ２００８年１１月２０日 木曜日 午後２時２８分