Filter
Top Products
29
Listening to the demo song
3
Playing the demo song
Here’s how to play back the demo song you loaded, and
adjust the monitor level.
1
Either press the [VIEW] key repeatedly or hold
down the [VIEW] key and use the CURSOR
[ ]/[ ] keys to access the VIEW screen
METER page.
The VIEW screen METER page contains meters that
show the input level of each channel and the output
level of the stereo output channel. It is convenient
to display this page when you want to check the
level of each track.
Note
Note
Make sure that the selected channel area at the upper left
of the METER page indicates either TRACK 1–8 or TRACK
9/10–15/16. If neither of these are displayed, press either
the [TRACK SEL] key 1–8 or 9/10–15/16.
2
Lower the AW16G’s [STEREO] fader to the -
infinity position. Also make sure that the
AW16G’s [MONITOR PHONES] knob and the
volume of your monitor system are turned
down.
3
Press the PLAY [ ] key.
The demo song will begin playing, and the level of
each track channel will be displayed in the METER
page of the VIEW screen.
4
To adjust the monitor level appropriately, use
the AW16G’s [MONITOR PHONES] knob and
the volume control of your monitor system.
Tip!
Tip!
The demo song uses the Scene function to switch the set-
tings of the mixer. This means that playback will occur
using the pre-specified balance — you do not need to
operate the faders.
5
To stop the song, press the STOP [■] key.