Filter
Top Products
31
Listening to the demo song
3
1
Press the RTZ [ ] key.
The demo song will be rewound to the beginning.
2
Press the PLAY [ ] button.
The demo song will begin playing.
3
While listening to the demo song, try operat-
ing faders 1–8 and 9/10–15/16.
Notice that the level of the corresponding track will
change. Operating the [STEREO] fader will change
the overall level of the song.
4
To mute the playback of a
specific track, access the
MONITOR screen ON/
OFF page, either by
repeatedly pressing the
[MONITOR] key or by
holding down the [MONITOR] key and using
the CURSOR [ ]/[ ] keys.
The MONITOR screen ON/OFF page lets you
switch each channel on/off. A channel that is
switched off in this page will not be sent to the ste-
reo bus or AUX bus, and will be muted.
5
Press the [TRACK SEL] key(s) for the track
channel(s) that you want to mute. (You may
select more than one channel.)
For example if you press [TRACK SEL] keys 1 and 3,
the screen will change as follows, and track chan-
nels 1 and 3 will be muted. At this time, [TRACK
SEL] keys 1 and 3 will go dark. The graphic in the
display will also indicate this.
Note
Note
The [TRACK SEL] key you press last will always light
orange regardless of the mute status. This indicates that
this channel is the “selected channel” (
→
p. 25).
Note
Note
In this page, pressing the [STEREO SEL] key will have no
effect.
6
To cancel the muted state, press the same
[TRACK SEL] key you pressed in step 5, to
make the indicator light green.
7
If you want to monitor the playback of just a
specific track, access the MONITOR screen
SOLO page by either repeatedly pressing the
[MONITOR] key or by holding down the
[MONITOR] key and using the CURSOR [ ]/
[] keys.
The SOLO page of the MONITOR screen lets you
mute all other channels while listening to only a
specific channel. (This is called the “solo” function.)
When you sol a channel in this page, the signals of
the remaining channels will be muted, and will no
longer be sent to the stereo bus or AUX buses.
8
Press the [TRACK SEL] key of the track chan-
nel that you want to solo.
For example if you press [TRACK SEL] key 3, the
screen will change as follows, and channels other
than track channel 3 will be muted. At this time,
[TRACK SEL] key 3 will light orange, and the other
[TRACK SEL] keys and [INPUT SEL] keys will go
dark.
Note
Note
Only one channel can be soloed at a time.
9
To cancel soloing, press the currently
selected [TRACK SEL] key (lit orange) once
again.
Note
Note
While playing the demo song, the level or the on/off sta-
tus of a channel you adjusted manually may return to its
previous setting. This is because the Scene function has
switched the state of the mixer settings, and is not a mal-
function (
→
p. 142). You can use the Recall Safe function
to temporarily prevent scenes from being recalled. (
→
p. 80)