Yamaha AW 16G Musical Instrument User Manual


 
55
Chapter 6
Overdubbing
This chapter explains how you can record additional performances
on other tracks while you listen to the previously-recorded tracks.
This chapter also explains how to switch virtual tracks and save
songs.
About overdubbing
“Overdubbing” is the process of recording additional
performances on other tracks while you monitor the
playback of previously-recorded tracks.
The diagram below shows the signal flow when you play
back tracks 1–4 and overdub track 5. In this example, the
signal that is input from MIC/LINE INPUT jack 1 is routed
through recorder track 5 and sent to track channel 5. This
signal is then sent to the stereo bus, mixed with the play-
back sound of track channels 1–4, and output from the
STEREO/AUX OUT jacks and the MONITOR OUT jacks /
PHONES jack.
Signal flow when overdubbing
Mixer section
Input
channels
Stereo output
channel
MIC/LINE
input jacks
Recorder section
Track
channels
Stereo bus
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8