Filter
Top Products
Performance Mode
160
■ Total Volume
Sets the overall volume for the performance. The
volume for each part will be explained later (see page
164).
❏ Settings: 0~127
■ Kbd/TG Mode (Keyboard/Tone Generator Mode)
Configures how the tone generator is connected (the
signal flow) when in Performance mode. Select
M.KBD (Master Keyboard) when mainly using the
keyboard for performing, and select TG (Tone
Generator) when mainly used as a tone generator for
the sequencer.
❏ Settings: M.KBD, TG
M.KBD (Master Keyboard)Mode
TG (Tone Generator Mode)
Part 16
Part 1
Part 16
Part 1
MIDI OUT
MIDI IN
TG
Transpose
Curve/Depth
Offset
Key/Vel Limit
Arp
Arp
MIDI OUT
MIDI IN
Part 16
Part 1
Part 16
Part 1
TG
Transpose
Curve/Depth
Offset
Key/Vel Limit
■ Ribbon Mode
Sets how the Ribbon Controller functions. When the
“reset” setting is selected, if you release your finger
from the Ribbon Controller, the value is reset to the
center position on the Ribbon. When the “hold”
setting is selected, if you release your finger from the
Ribbon, the value of the position where your finger
left the Ribbon is maintained.
❏ Settings: reset, hold
This parameter is not available with EX5R.
[F5]: ARP (Arpeggio)
Parameters related to the Arpeggiator. Select the ARP
menu with [F5] and the following setting directory
menu is displayed.
[F5]: [ARP-EDIT] (Arpeggio Edit)
[F8]: ARP
[F5]: ARP-EDIT (Arpeggio Edit)
When “USR” (USER) 51-100 is selected in Arpeggio
Type with the Arpeggiator set to on, the ARP-EDIT
menu is added to the [F5] key at the bottom of the
screen. After entering the ARP-EDIT screen using
[F5], you can perform Arpeggio editing operations. You
can create your own original arpeggio. For more
information, see page 238.
[F8]: ARP
Lets you select the type of arpeggio that will be used in
the selected Performance, as well as determine the way
the arpeggiator functions, and select MIDI related
settings.
Performance/E/qx 5/21/98 11:35 AM Page 160