Zoom MRS-802 Musical Instrument User Manual


 
Reference [Effects]
ZOOM MRS-802
106
7.
To confirm the new name, press the [STORE] key in
the control section twice.
The new name is stored, and the unit returns to the patch
selection screen.
NOTE
Keep in mind that the name will revert to the previous setting
if you switch to another patch without storing the edited
patch name.
Applying the insert effect only to
the monitor signal
Normally when the insert effect is placed into the input
mixer, the signal processed by the effect will be recorded on
the track. If necessary, however, you can apply the insert
effect only to the monitor signal, and record the unprocessed
input signal on the track. For example when recording the
unprocessed sound of a vocal performance, the vocalist may
be more comfortable singing if an insert effect suitable for
mic recording is applied to the monitor signal.
1.
Set the insert effect point to the input mixer.
2.
Press the [UTILITY] key in the display section.
The utility menu appears.
3.
Use the cursor left/right keys to call up the
indication “UTILITY REC SRC”, and press the
[ENTER] key.
The display changes as follows.
In this condition, you can select one of the following two
signal types to be recorded on the track.
WET
The input signal that has passed through the insert effect will
be recorded on the track (default setting).
•DRY
Only the unprocessed input signal will be recorded on the
track. Even in this case, however, the insert effect will be
applied to the monitor signal.
INPUT
Recorder
Insert effect
UTILITY
UTILITY
TR EDIT
TR EDIT
REC SRC
REC SRC
WET
WET