Filter
Top Products
Reference [MIDI]
ZOOM MRS-802
133
NOTE
When an SMF is played in the above condition, the SMF
playing information and the rhythm song or rhythm pattern
information of the MRS-802 will be sent to the internal drum
kit at the same time. If you want to use the drum kit only for
the SMF, you must first select an empty rhythm song/rhythm
pattern.
HINT
Control Change information in the SMF acts directly on the
drum kit.
1.
From the main screen, press the [UTILITY] key in
the display section.
The utility menu appears.
2.
Use the cursor left/right keys to bring up the
indication “UTILITY SMF” on the display, and press
the [ENTER] key.
The SMF menu appears.
3.
To control SMF output from the MIDI OUT
connector, use the cursor left/right keys to bring
up the indication “SMF OUTPUT” on the display,
and press the [ENTER] key.
4.
Turn the dial to select ON (output enabled) or OFF
(output disabled). Then press the [EXIT] key.
The display returns to the SMF menu.
HINT
The factory default setting is “ON”.
5.
To select the MIDI channel to be assigned to the
internal drum kit, use the cursor left/right keys to
bring up the indication “SMF ChToDrum” on the
display, and press the [ENTER] key.
6.
Turn the dial to select one of the settings listed
below, and press the [EXIT] key.
• OFF
No SMF playing information is sent to the drum kit.
•1 - 16
The playing information of the selected MIDI channel is
sent to the drum kit and not to the MIDI OUT connector.
HINT
The factory default setting is “10” (MIDI channel 10).
7.
To return to the main screen, press the [EXIT] key
several times.
OUTPUT
OUTPUT
ON
ON
ChToDrum
ChToDrum
10CH
10CH