Filter
Top Products
Reference [Recorder]
ZOOM MRS-802
39
3.
To stop playback, press the STOP [
P
] key.
4.
To cancel the master track playback mode, press
the [MASTER] status key so that the key goes out.
Muting of tracks 1 - 8 and the rhythm section is canceled,
and the unit returns to normal operation. Status keys that
were automatically turned off are returned to the previous
condition.
Combining multiple tracks on
another track (Bounce function)
How bounce works
“Bounce” is a function that mixes the performances of the
recorder section and the drum track, and records them on
one or two tracks. (This is sometimes called “ping-pong
recording”.)
For example, you might bounce the contents of tracks 1 - 6
onto tracks 7/8 and then switch the V-takes of tracks 1 - 6 to
record new versions of your performance.
HINT
•You can also mix the signals from the INPUT jacks into the
bounce recording.
• If you select only one mono track as the bounce
destination, the signal mixed to mono will be recorded.
• If necessary, you can play back all eight tracks, and
bounce onto empty V-takes.
Making bounce settings
Before using the bounce function, you may have to make
certain settings.
■ Specifying playback/mute for the
recording track(s)
In the default condition of the MRS-802, the bounce
destination recording track(s) will be muted. If you want to
play back a track while you bounce-record on another V-
take of that track, use the following procedure to change the