Filter
Top Products
Quick Tour
ZOOM MRS-802
23
The selected rhythm pattern starts. When the last measure
has been played, playback jumps to the beginning and
continues.
HINT
During play, the status key for the drum sound lights up. You
can also press the status key to play the corresponding drum
sound (
→ p. 77).
5.
To change the rhythm pattern, you can use the dial
or the cursor up/down keys.
When you turn the dial to select another pattern, the new
pattern will start playing when the end point of the current
pattern is reached. (The display indication flashes until the
pattern starts playing.)
If you use the cursor up/down keys to select the pattern,
playback starts at that point.
6.
To change the tempo, press the [TEMPO] key in the
rhythm section and turn the dial to change the
tempo value (BPM) shown on the display.
When the setting is complete, press the [EXIT] key to return
to the previous screen.
NOTE
If you record a track while listening to the rhythm section and
you change the rhythm tempo afterwards, the rhythm
section and recorded contents may become mismatched.
You should therefore always set the tempo first and then
record the audio track.
HINT
You can also change the tempo setting by tapping the
[TEMPO] key (
→ p. 79).
7.
To stop playback, press the [STOP] key.
8.
To return to the main screen, press the [EXIT] key
several times.
The [DRUM] key goes out. When you use a key of the
transport section in this condition, the rhythm section and
recorder section will operate in sync.
HINT
You can also create an original rhythm pattern (→ p. 90).
Current tempo
Tempo
Tempo
BPM=
BPM=
120.0