Filter
Top Products
Installing the CD-R/RW Drive
ZOOM MRS-802
17
Power cable
Flat cable
Caution
1.
Remove the drive mounting screws
from the bottom of the MRS-802,
and remove the bottom plate.
Take care not to lose the screws, since they
will be required again for assembly.
2.
Remove the drive bay blank panel
from the front side of the chassis.
3.
Plug the power cable and flat cable
from the chassis into the respective
connectors on the CD-R/RW drive.
Installing the CD-R/RW Drive
To install the separately available CD-R/RW drive into the MRS-802 model without preinstalled CD-R/RW drive, proceed as
follows.
Make sure to disconnect all cables and AC adaptor before installing the CD-R/RW drive.