Filter
Top Products
Reference [MIDI]
ZOOM MRS-802
129
Making MIDI-related settings
This section explains how to make MIDI-related settings.
The procedure is the same for most settings. The basic steps
are as follows.
Basic procedure
1.
Press the [DRUM] key in the rhythm section, and
then press the [UTILITY] key.
The rhythm utility menu for making various rhythm section
settings appears.
2.
Use the cursor left/right keys to bring up the
indication “UTILITY MIDI” on the display.
3.
Press the [ENTER] key.
Now you can select MIDI-related setting items.
4.
Use the cursor left/right keys to select one of the
following items, and press the [ENTER] key.
• DRUM CH
Set the MIDI channel of the drum track.
• SPP
Turn Song Position Pointer transmission on/off.
• COMMAND
Turn Start/Stop/Continue message transmission on/off.
• CLOCK
Turn Timing Clock transmission on/off.
HINT
There is no parameter for turning Control Change on or off.
When the drum kit is set to send and receive MIDI messages,
Control Change send/receive is also enabled.
5.
Press the [ENTER] key to display the setting of the
selected item, and turn the dial to change the
setting.
For details on each item, refer to the following explanation.
NOTE
Operation steps related to SMF are explained on page 131.
6.
When you have finished making settings, press the
[EXIT] key several times.
The unit returns to the main screen.
Utility
Utility
MIDI
MIDI
MIDI
MIDI
DRUM CH
DRUM CH