Filter
Top Products
Reference [Creating a CD]
ZOOM MRS-802
114
6.
Turn the dial to select the project to be used as
track 1 of the album.
The indication “END OF PROJ” moves up to the next track,
and the screen changes as follows.
(1) Project number
(2) Project name
This shows the name and number of the project to be used as
recording source.
(3) Track number
This shows the track number to be used as write target on the
CD-R/RW disc.
(4) V-take duration
This shows the length (in hours/minutes/seconds/
milliseconds) of the currently selected V-take of the master
track in the selected project.
NOTE
Projects with a master track for which an unrecorded V-take
is selected cannot be selected as source. If a desired project
name does not come up, check whether a recorded V-take
was selected for its master track.
7.
When the project for track 1 has been selected, use
the cursor right key to move to track 2.
The screen changes as follows.
8.
Turn the dial to select the project to be used as
track 2 of the album.
9.
In the same way, select projects for track 3 and
subsequent tracks.
The maximum allowable number of tracks is 99, provided
that there is enough free capacity on the disc.
•To audition the master track
Press the PLAY [R] key. The master track of the project
currently shown on the display is played. To stop playback,
press the STOP [
P] key.
•To change projects in an album
Use the cursor left/right keys to select the track number for
which you want to change the project and use the dial to
select another project.
•To delete a project from an album
Use the cursor left/right keys to select the track number
whose project you want to delete and press the [DELETE/
ERASE] key. The indication “DELETE SURE?” appears on
the display. To delete the project from the album list, press
the [ENTER] key. If you wish to cancel the process, press
the [EXIT] key instead. When a project is deleted, the
following tracks are moved up by one position.
•To delete all projects from an album
In the condition for registering projects in an album, press
the [DELETE/ERASE] key and then the cursor down key.
The indication “ALL DEL SURE?” appears on the display.
To delete all projects from the album list, press the [ENTER]
key. If you wish to cancel the process, press the [EXIT] key
instead.
•To check the capacity of a CD-R/RW disc
Press the cursor down key. The remaining time of the disc
appears in the lower part of the display. To return to the
previous screen, press the cursor up key.
10.
When you have stored all desired projects in the
album, press the [ENTER] key twice.
The display changes as follows.
END OF
END OF
PROJ
PROJ
00000 00
01
PRJ 001
PRJ 001
PRJ001
PRJ001
0 436120
01
(1)
(4)
(2) (3)
END OF
END OF
PROJ
PROJ
02
ALBUM
ALBUM
SURE?
SURE?