Filter
Top Products
Reference [Effects]
ZOOM MRS-802
110
Importing patches from another
project
This section explains how to import (load) all patches for the
internal effects from another project that is already saved on
the hard disk.
NOTE
Keep in mind that importing patches in this way will overwrite
all patches in the current project. Take care not to
accidentally erase patches that you wish to keep.
1.
Press the [INSERT EFFECT] keys, [REVERB] key, or
[CHORUS/DELAY] key to bring up an effect related
parameter on the display.
To import a patch, an effect related parameter must be
shown on the display.
2.
Press the [UTILITY] key.
The utility menu for the effect appears on the display.
3.
Press the [ENTER] key.
In this condition, you can select the project from which to
import.
4.
Turn the dial to select the import source project,
and press the [ENTER] key.
The indication “Import SURE?” appears on the display.
5.
To carry out the import process, press the [ENTER]
key once more. To cancel the process, press the
[EXIT] key.
The patches of the selected project are imported into the
current project. When the import process is completed, the
screen of step 1 appears again.
UTILITY
UTILITY
Import
Import
Project name Project numbe
r
Import
Import
PRJ007
PRJ007
7