Filter
Top Products
Reference [Rhythm]
ZOOM MRS-802
91
9.
Turn the dial to select the beat. The setting range is
1 - 8 (1/4 - 8/4). Then press the [EXIT] key.
The rhythm pattern edit menu reappears.
10.
To set the length (number of measures) of the
rhythm pattern, use the cursor left/right keys to
select the indication “EDIT BarLen”, and press the
[ENTER] key.
The current length of the pattern is shown as number of
measures.
11.
Turn the dial to select the desired setting, and
press the [EXIT] key.
The setting range is 1 - 99.
12.
Press the [EXIT] key twice. The display returns to
the screen of step 3.
Step input
For step input, you enter each note separately, while the
MRS-802 is in the stop condition.
For rhythm pattern step input, you specify the step length
(interval to next note or rest) using the quantize value. Then
you use the status keys 1 - 8 and the PLAY [
R] key to enter
notes and rests.
When you press a status key to select a sound and then press
the PLAY [
R] key, playing information is entered at that
point, and the step advances by an interval corresponding to
the current quantize value.
NOTE
If you use the status keys for input, the recorded note
intensity (velocity value) will be constant. To change the
velocity value, use the "Velocity" item of the rhythm utility
menu (
→ p. 97).
If you only press the PLAY [R] key, no playing information
is entered, but the step advances by an interval
corresponding to the current quantize value.
1.
In rhythm pattern mode ([SONG/PATTERN] key
out), press the [DRUM] key so that it is lit.
2.
Turn the dial to select an empty rhythm pattern
number.
3.
Press the REC [
O
] key.
The display changes as follows, and step input becomes
possible.
On the first line of the display, “Q = xx” shows the quantize
value (possible values for xx: 4 - 32, Hi). In the bottom right
of the display, the current position is shown in measures/
beats/ticks.
4.
Use the cursor up/down keys to select the
quantize value (length) of the note you want to
enter (
→
P. 90).
The quantize value that you select here becomes the length
of one step during step recording. You can use the cursor up/
down keys at any time to change the quantize setting.
HINT
The quantize value setting is linked to the quantize setting for
real-time input. If you change one setting, the other will also
change.
Number of measures
BarLen
BarLen
4
4
Tick
Q=16
Q=16
001 1 0
Beat
Measure
Quantize value: sixteenth note Quantize value: quarter note
[Rhythm pattern step input]