Filter
Top Products
CHANNEL
91
GROUPS Under the FX/AUX send section, you can see the group assignment for
the selected channel. These may be changed in the PATCH pages or
more conveniently directly on the console using the ASSIGN keys.
The soft key functions on the CHANNEL EQ page are:
EXIT [F1] Takes you back to the main MIXER page.
UTILS [F2] Takes you to the Mix Channel Utilities page (see below)
DYN [F3] Takes you to a page where you can set the channel's dynamics proces-
sors (see below).
FLAT EQ [F4] Will flatten the EQ but will leave other channel parameters intact.
EQ:ON/OFF [F5] Allows you to toggle the EQ ON/OFF.
LIBRARY [F6] Takes you to the EQ Library page. (see below)
Pressing UTILS [F2] takes you to the Mix Channel Utilities page:
NAME Pops up a prompt where you can name the selected channel in the usualway.
COPY Allows you to copy the settings of one channel to another.
RESET Will initialise the selected channel(s) parameters to flat settings.
v1.6 Operator’s Manual