Filter
Top Products
DELAY
135
PANPONG DELAY
This delay effect is a variation of the PINGPONG DELAY, with a Center delay between
Left and Right. An additionnal Mode parameter is available to set the direction of the
panning effect:
• Mode : LCR .......... Left, center, then right
RCLR .......... Right, center, then left
STEREO DELAY
This delay effect can be set for the left and right channels individually.
• LDelay (1ms - 1500ms) Adjusts the Delay time of the Left channel.
• Fdback (0% - 100%) Adjusts the amount of delay Feedback (Left channel).
• HFdamp (20Hz - 20kHz) Sets a frequency at which the higher range of the feed-
back sound (Left channel) is cut.
• RDelay (1ms - 1500ms) Adjusts the delay time of the Right channel.
• Fdback (0% - 100%) Adjust the amount of delay Feedback (Right channel).
• HFdamp (20Hz - 20kHz) Sets a frequency at which the higher range of the feed-
back sound (Right channel) is cut.
XOVER DELAY
This is a variation of the STEREO DELAY. The feedback from the L/R channels is input
to the opposite channels.
• LDelay (1ms - 1500ms) Adjusts the Delay time of the Left channel.
• Fdback (0% - 100%)
Adjusts the amount of delay Feedback (Left/Right channel).
• HFdamp (20Hz - 20kHz) Sets a frequency at which the higher range of the feed-
back sound (Left/Right channel) is cut.
• RDelay (1ms - 1500ms) Adjusts the delay time of the Right channel.
• Width (0% - 100%) Adjusts the width and spread of the stereo image.
v1.6 Operator’s Manual