Filter
Top Products
16
Top Panel
Furthermore, the function of the Q-STRIP FUNCTION keys described earlier also change
when the Q-CHANNEL is enabled:
The labelling underneath the keys denotes their function when in Q-CHANNEL 'mode' and
you have 'hands-on' control to bypass the EQ and to switch FX/AUX 1-4 as pre- or post-fade.
Of course, for the Q-CHANNEL 'mode' to be applicable, you must select a channel for edit-
ing (i.e. you should press a channel's SELECT key just under the row of encoders). The SE-
LECT key of the selected Channel is illuminated. On power up, the default selection is the
Master Channel.
NOTE:
Enabling Q-CHANNEL automatically calls up the MIXER / CHANNEL page of the selected
Channel on the LCD. Then , when disabling Q-CHANNEL, the display returns to the previous screen.
v1.6 Operator’s Manual