Filter
Top Products
82
DSP MODE
NORMALISE Allows you to normalise the selected edit region. The signal is analysed
for its peak level and the edit region is then increased proportionally to
obtain maximum level.
Pressing MORE [F6] followed by NORMAL [F1] displays this screen:
There are no parameters to adjust for this function and pressing PROCESS
will simply normalise the selected edit region bring it to maximum level.
NOTE:
When processsing multiple tracks simultaneously, Normalising always normalises according to
the loudest section of audio on any of the selected tracks, so if tracks 1, 2, 3, 4, 5 and 6 are normalised and
there is a loud section on track 4, tracks 1, 2, 3, 5 and 6 will be normalised according to this audio level.
RESAMPLE Allows you to convert the sampling rate of the selected edit region.
This also includes a dithering function to convert the Bit depth.
Pressing MORE [F6] followed by RESAMPLE [F2] displays this screen:
Here, you can set the original sample rate of the audio (From [Q3]) and
the new sample rate that you want to convert to (To [Q4]).
Using Q5 [Dither], you can also change the bit depth of the selected audio.
PROCESS [F6], or the ENTER key, initiates the process.
v1.6 Operator’s Manual