Filter
Top Products
37
MODEL 3081 pH/ORP SECTION 5.0
OPERATION WITH REMOTE CONTROLLER
SECTION 5.0
OPERATION WITH REMOTE CONTROLLER
CALIBRATE PROGRAM DIAGNOSE
CALIbrAtE
EXIT NEXT ENTER
7.00
pH
MV
F
A
U
L
T
H
O
L
D
♥
Appears when transmitter
is in hold (see Section 8.3.2)
Appears when a disabling
condition has occurred
(see Section 8.3.2)
Appears during HART and AMS
operations
Active menu: CALIBRATE,
PROGRAM, or DIAGNOSE
Sub-menus, prompts, and
diagnostic messages appear
here
pH or ORP (ORP in mV)
Units of display
Available commands for sub-
menu, prompt, or diagnostic
5.1 Displays
5.2 Infrared Remote Controller (IRC) - Key Functions
5.3 Menu Tree - pH
5.4 Diagnostic Messages - pH
5.5 Menu Tree - ORP
5.6 Diagnostic Messages - ORP
5.7 Security
FIGURE 5-2. Program Display Screen
The program display screen appears when calibrating, programming, or reading diagnostic messages.
FIGURE 5-1. Process Display Screen
The process display screen appears during normal operation.
pH or ORP (ORP in mV)
Temperature in °C or °F
Transmitter output signal in
mA or % of full scale
5.1 DISPLAYS
Figure 5-1 shows the process display screen, and Figure 5-2 shows the program display screen.