Filter
Top Products
VTrak 15110 User Manual
104
1. Click the Subsystem icon.
2. Click on the VTrak icon.
3. Click on the Controllers icon.
4. Click on the Controller icon.
5. Click on the Settings tab.
6. Enter an alias in the field.
7. Click the Submit button when you are done.
To set date and time on the VTrak subsystem:
1. Follow steps 1 through 5 above to access the Controller’s Settings tab.
2. Select the month from the dropdown menu.
3. Select the day from the dropdown menu.
4. Select the year from the dropdown menu.
5. Enter the hour of the day (24-hour clock) in the left field.
6. Enter the minutes in the right field.
7. Click the Submit button when you are done.
Enclosures
Enclosure List
The Enclosures–Information tab lists the information about the enclosures under
this subsystem. The Status field reports Functional when operation is normal or it
cites a problem in red.
If the Status field reports a problem, click on the Enclosure icon (under the
Enclosures icon in Tree View) for more information.
To access the Enclosures–Information tab:
1. Click the Subsystem icon.
2. Click on the VTrak icon.
• Enclosure List (below)
• Enclosure (page 105)
• FRU VPD (page 105)
• Battery (page 106)
• Buzzer (page 106)
• Physical Drive List (page 107)
• Physical Drive (page 108)