Filter
Top Products
VTrak 15110 User Manual
190
Firmware Update – WebPAM
This is the preferred firmware update method for most applications. This
procedure takes about ten minutes. There are alternative methods based on the
CLU (page 192) and a serial port connection (page 194).
Preparation
In order for the firmware update to work, three things are required:
• TFTP server IP address
• TFTP server directory name
• A firmware image file
The WebPAM PRO Utility Server incorporates a TFTP server. No additional
software is required.
TFTP Server IP Address
You must tell WebPAM PRO the IP address of the TFTP server so it can upload
the firmware file from that location.
1. Click on the Subsystem icon in Tree View.
2. Click on the VTrak icon.
3. Click on the Network Management icon.
4. Click on the Settings tab.
5. Enter the TFTP Server IP address.
6. Click the Submit button when you are done.
TFTP Server Directory Name
You must tell WebPAM PRO which directory on the TFTP server has the firmware
file. Use this function to verify or set a directory name. The default directory is
TFTP-Root.
1. Click on the Administration Tools icon in Tree View.
2. Click on the Software Management icon.
3. Click on the TFTP Server tab.
4. Enter a TFTP directory name.
5. Click Submit when you are done.