Filter
Top Products
VTrak 15110 User Manual
156
Wipe Out Boot Sector
When a disk drive is bootable, it contains a boot sector. In some cases, a boot
sector is undesireable when the disk drive is used in a logical drive. This feature
erases the boot sector from the disk drive.
1. Press 3 and Enter to wipe the boot sector from the selected disk drives.
Enter PD IDs and/or ID ranges>5
Total 1 PD has been selected.
Wipe out boot sector for PD 5(y/n)?>y
Wiping out boot sector for PD 5 ...
Press Enter key to return
2. Type the ID numbers of the physical drives for which you want to cerase the
boot sector and press Enter.
3. Press Enter to return to the Physical Drive Management menu.
Wipe Out Reserve Sector
When a disk drive belongs to a logical drive, information about that arrangement
is stored in the Reserve sector. In some cases, the RAID controller will not use a
disk drive that has information in its Reserve sector.
For example, a disk drive that is part of a logical drive fails. If you replace the
failed drive with a drive that was previously used in a logical drive, VTrak will not
use it to rebuild the present logical drive. You must erase the Reserve sector on
the replacement drive first.
1. Press 4 and Enter to wipe the Reserve sector from the selected disk drives.
Enter PD IDs and/or ID ranges>6
Total 1 PD has been selected.
Wipe out boot sector for PD 6(y/n)?>y
Wiping out boot sector for PD 6 ...
Press Enter key to return
2. Type the ID numbers of the physical drives for which you want to cerase the
Reserve sector and press Enter.
3. Press Enter to return to the Physical Drive Management menu.