Chapter 3: Setup
59
SMART check: enabled
Initialization: full
Create Logical Drive now(y/n)?>y
4. If you agree with the specifications, press Y and Enter.
If you disagree, press N and Enter. Then select Create New Disk Array
(below) and input your own settings.
This completes disk array creation. Go on to logical drive creation.
Create a Disk Array Manually
Use this feature to manually build a logical drive to meet your own requirements
or to use less than the full number of available disk drives. See page 214 for a
discussion of RAID Levels, the number of drives each supports and an
explanation of the available options.
1. From the Main menu, press 3 and Enter to access Disk Array Management.
2. Press 2 and Enter to access the Create New Disk Array.
**************Define New Logical Drive**************
Total 8 Physical Drives
*********Physical Drives Selection*********
ID Name Capacity
----------------------------------------------------------
1 Maxtor 5A250J0 251 GB
3 WDC WD2000JB-00FUA0 200 GB
4 WDC WD2000JB-00FUA0 200 GB
7 ST380013AS 80 GB
9 WDC WD1200JD-00FYB0 120 GB
11 ST380013AS 80 GB
12 WDC WD1200JD-00FYB0 120 GB
15 Maxtor 6Y080M0 82 GB
Enter Physical Drive IDs and/or ID ranges
separated by commas. For example: 1,5,8-15.
Press R to continue after you have finished
selecting Physical Drives.
Your input?>1,3,4,5,9
3. Choose the physical drives for your logical drive and press Enter.
*********Physical Drives Selection*********
ID Name Capacity
----------------------------------------------------------
