Filter
Top Products
VTrak 15110 User Manual
60
*1 Maxtor 5A250J0 251 GB
*3 WDC WD2000JB-00FUA0 200 GB
*4 WDC WD2000JB-00FUA0 200 GB
*7 ST380013AS 80 GB
*9 WDC WD1200JD-00FYB0 120 GB
11 ST380013AS 80 GB
12 WDC WD1200JD-00FYB0 120 GB
15 Maxtor 6Y080M0 82 GB
4 Physical Drives have been selected.
Enter Physical Drive ids and/or id ranges
separated by commas. For example: 1,5,8-15.
Press R to continue after you have finished
selecting Physical Drives.
Your input?>r
4. When you have selected all the physical drives, press R and Enter.
RAID Mode Options:
0 - RAID 0 (Striping)
1 - RAID 1 (Mirroring)
3 - RAID 3 (Parity)
5 - RAID 5 (Parity Distributed)
10 - RAID 10 (Striping/Mirroring)
50 - RAID 50
Please enter RAID mode(0,1,3,5,10)>5
The prompt displays available RAID modes.
5. Type the RAID mode (level) for your logical drive and press Enter.
Stripe Block Size (4, 8, 16, 32, 64, 128) in KB?>64
Enter the Disk Array name>Daves Array
Enable initialization(y/n)?>y
Full or quick initialization(f/q)?>q
Quick initialization enabled
6. Type the stripe block size, logical drive name, whether you want initialization
and if so, quick or full. Press Enter after each input.
If you chose RAID 1, you will not see a stripe block size. After the last item, a
list of your logical drive specifications displays.
Logical Drive creation information:
Name: Daves Array
Number of Physical Drives: 4
RAID mode: RAID 5
Stripe block size: 64KB
SMART check: enabled