Filter
Top Products
VTrak 15110 User Manual
136
Audible Alarm
VTrak’s audible alarm (buzzer) has three sound patterns:
• Beep. Beep. Beep. – Indicates that a logical drive is rebuilding
• Beep-beep, beep-beep, beep-beep. – Indicates that a logical drive is critical
• Beep-beep-beep. Beep-beep-beep. – Indicates a problem with a field
replaceable unit (FRU)
• 10 second continuous beep – Indicates that a logical drive is offline
See page 189 for more information about field-replaceable components.
See page 234 for a discussion of critical and offline logical drives.
Alarm Settings
• Enable – Sounds for all conditons listed above.
• Disable – Does not sound for any condition.
• Silence – Stops the alarm from sounding for the current event. If another
event happens, the alarm will sound again.
To change Audible alarm settings:
1. From the CLU Main menu, press 9.
The buzzer options appear.
----------------------------------------------------
Buzzer
1. Silence Buzzer
2. Disable Buzzer
R. Return to Previous Menu
Please enter your menu choice>
2. Do one of the following:
• To silence the buzzer (for the current event only), press 1 and Enter.
• To disable the buzzer (off until enabled again), press 2 and Enter.
Silence/Disable/Enable buzzer(y/n)?>
3. Press Y and Enter to confirm your choice.
If you disabled the buzzer, repeat the same procedure enable it again.