Filter
Top Products
144
Editing Songs
Copying or merging may sometimes create blank measures at the
beginning of a phrase track or pattern. Truncate deletes silent
portions from the beginning of the specified phrase track to the first
note-on.
* If other sequencer data (such as program changes or control changes)
is recorded between the beginning and the first note-on of the specified
phrase track, only the last data event of each type will be placed before
the note-on.
For details on the settings, refer to
Basic Operation for Track
Editing
(p. 133).
fig.Truncate2
Below the Track/Pattern parameter is displayed the location of the
beginning of the specified track, and the position of the first note-on.
Micro Edit lets you edit individual items of sequencer data recorded
in a song, such as MIDI messages and tempo data.
* When you’re going to edit a song, you have to first load it into the
Temporary Area (p. 131).
Access the Microscope screen when you want to view the sequencer
data recorded in a song. Each line indicates the location (measure-
beat-tick) at which the sequencer data is recorded, and the data
recorded at that location.
1.
Load the song that contains the sequencer data you want to
view/edit (p. 131).
2.
Press [F4 (MICRO)].
The MICROSCOPE screen appears.
Press or to view sequencer data.
fig.Microscope.e
* Each time you press [PAGE] you will switch between the two screens.
fig.Microscope2
3.
Press [F5 (TRK/CH)].
The Track/Ch Select window appears.
fig.TrackSelect
If you want to edit a pattern, press [PATTERN] to make it light.
4.
Press to move the cursor to “Track,” and select the
track or pattern whose sequencer data you want to view/
edit.
TRACK 1–TRACK16:
Specified phrase track
TEMPO:
Tempo track
BEAT:
Beat track
PTN001–PTN100:
Specified pattern (pattern mode only)
Deleting Blank Measures
(Truncate)
Parameter
Value Explanation
Track/Pattern
TRK 1–16,
PTN001–100
Phrase track or pattern
from which blank mea-
sures will be deleted
TRK 1–16:
Specified phrase track
PTN001–100:
Specified pattern
Editing Individual Items of
Sequencer Data (Micro Edit)
Editing Sequencer Data (Basic
Procedure in the Microscope)
Location of the sequencer data (measure-beat-tick)
MIDI channel
Displays the parameter data at the cursor location
Select the track or pattern
Sequencer data
Fantom-Xa_e.book 144 ページ ２００４年１０月２２日 金曜日 午後２時３分