Filter
Top Products
150
Saving/Loading a Song (Save/Load)
Songs you record are initially held in Temporary Area. A song in
Temporary Area will be lost when you turn off the power or when
you load a different song. If you want to keep the song, you must
save it to user memory or a memory card.
Conversely in order to edit a song (p. 131), you must first load it into
Temporary Area.
1.
Hold down [SHIFT] and press [WRITE].
The SAVE/LOAD MENU screen appears.
fig.SaveLoadMenu
2.
Press [F1]–[F3] to select the format in which you want to
save the song.
•
Save Song+Smpls:
The Temporary Song will be saved in MRC Pro song format. A
file name extension of “.SVQ” will automatically be added to
the song. The song will include the data of the temporary area.
All samples in sample memory will be saved.
•
Save Song:
The Temporary Song will be saved in MRC Pro song format. A
filename extension of “.SVQ” will automatically be added. The
song will include the data of the temporary area.
•
Save all Samples:
All samples in sample memory will be saved.
✔
: Saving is possible
The performances, patches, and system setup you are using at that
time are saved together with the sequencer data.
The performances and patches saved along with the song are special
data used to reproduce the song; they are separate from the user
performances and user patches.
* If you want to use these performances or patches in a different song, or
without reference to a song, you’ll need to save them in the user area.
* Mastering Effect settings are not included in the data saved with a
song. In order to completely reproduce the way in which the song
played back at the time it was saved, you will also need to check the
mastering settings.
Parameters included in System Setup
• Sound generator mode (Patch/Performance) and Patch/
Performance numbers
• MFX 1-3/Chorus/Reverb switch
• The selection of whether Patch mode chorus/reverb will use the
sound settings of the keyboard or of the pads
• Transpose and Octave Shift values
• The selection of the function controlled by D Beam
• All settings in the Arpeggio screen and the Arpeggio on/off
setting
• All settings in the Rhythm Group screen and the Rhythm
Pattern on/off setting
• All settings in the Chord Memory screen and the Chord
Memory on/off setting
• The selection of whether the bender, modulation, D Beam, and
knobs will be used with the keyboard or with the pads
Here’s how to save the Temporary Song along with all samples in
sample memory and the current sound generator settings.
1.
From the SAVE/LOAD MENU screen, press [F1].
The SONG FILE NAME screen appears.
fig.SongFileName
2.
Assign a file name to the song (up to 8 characters). A file
name extension of “.SVQ” will automatically be added to
the song.
For details on assigning names, refer to p. 28.
Song file names may not contain lowercase characters or certain
symbols (“ * + , . / : ; < = > ? [ \ ] |).
3.
After you have assigned a name, press [F6 (WRITE)].
The SAVE SONG screen appears.
fig.SaveSong
4.
Press [F1 (USER)] (User memory) or [F2 (CARD)] (Memory
card) to select the location where you want to save the
song.
5.
Press [F6 (SAVE)].
A message will ask you for confirmation.
6.
Press [F6 (EXEC)] to execute.
* To cancel, press [F5 (CANCEL)].
Saving a Song (Save)
Basic Procedure
Function
Button Song ALL Samples
Save Song+Smpls
[F1]
✔
✔
Save Song
[F2]
✔
–
Save all Samples [F3] –
✔
Data saved together with a song
Saving a Song with Samples
(Save Song+Smpls)
Fantom-Xa_e.book 150 ページ ２００４年１０月２２日 金曜日 午後２時３分