Filter
Top Products
200
Settings Common to All Modes (System Function)
[F1 (METRO)]
[F2 (REC TRK)]
[F3 (SYNC)]
System Menu [F4 (SEQ/TEMPO)]
Parameter
Value Explanation
Metronome Mode
OFF, PLAY-ONLY,
REC-ONLY,
PLAY&REC,
ALWAYS
Specifies when you want the metronome to sound.
* If a check mark (
✔
) is added by pressing [F5 (CLICK)] in the Tempo window which appears when you
press [TEMPO], the metronome will always sound.
OFF:
Will not sound.
PLAY-ONLY:
Will sound only during playback.
REC-ONLY:
Metronome will sound only for recording.
PLAY&REC:
Metronome will sound for playback and recording.
ALWAYS:
Metronome will always sound.
Metronome Level 0–10 Volume of the metronome
Metronome Sound TYPE1–TYPE4
TYPE 1:
A conventional metronome sound (A bell will sound on the first beat.)
TYPE 2:
Clicks
TYPE 3:
Beeps
TYPE 4:
Cowbell
Beat Indicator Mode REC&PLAY,
ALWAYS
How the beat indicator on the panel will blink
ALWAYS:
always blinks at the specified tempo
REC&PLAY:
blinks only during playback and recording
Parameter
Value Explanation
Rec Track Select
MANUAL, AUTO Specifies whether track selection will be automatic or manual when recording on the sequencer.
MANUAL:
You’ll be able to select the track number manually. This is convenient when you
want to record a performance that consists of more than one channel.
AUTO:
The phrase track of the same number as the current part will be selected automatical-
ly. This is convenient when you want to record only one channel in a track.
Parameter Value Explanation
Sync Mode
MASTER,
SLAVE-MIDI,
SLAVE-MTC,
REMOTE
Synchronization message that the Fantom-Xa’s sequencer will use for operation
MASTER:
The Fantom-Xa will be the master. Choose this setting when using the Fantom-Xa
by itself without synchronizing to another device, or when you want other MIDI devices to
synchronize to the Fantom-Xa.
SLAVE-MIDI:
The Fantom-Xa will be the slave. Choose this setting when you want the Fan-
tom-Xa to synchronize to MIDI Clock messages received from another MIDI device.
SLAVE-MTC:
The Fantom-Xa will be the slave. Choose this setting when you want the Fan-
tom-Xa to synchronize to MTC (MIDI Time Code) received from an external device.
REMOTE:
Use this setting when you wish an external MIDI device to have remote start/stop
control. The tempo will be in accord with what has been set on the Fantom-Xa.
Sync Output OFF, ON Set this parameter “ON” when you want synchronization related MIDI messages (MIDI Clock,
Start, Continue, Stop, Song Position Pointer and Song Select) to be transmitted to an external
MIDI device. If not, set it “OFF.”
Arp/Rhythm Sync
Switch
OFF, ON Specifies whether the arpeggio or rhythm pattern will start/stop in synchronization with the se-
quencer. This parameter does nothing if the sequencer is stopped.
OFF:
Start/stop will not synchronize to the sequencer.
ON:
While the sequencer is running, the arpeggio or rhythm pattern will start at the begin-
ning of the next measure. When you stop the sequencer, the arpeggio or rhythm pattern will
also stop.
Tempo Override OFF, ON Specifies whether the sequencer tempo will change (ON), or will not change (OFF) when you
switch performance.
Fantom-Xa_e.book 200 ページ ２００４年１０月２２日 金曜日 午後２時３分