Filter
Top Products
AW2400 Owner’s Manual
Output signal patching
Patching and signal flow
104
11
The PATCH screen Output page lets you select the signals that are assigned to the AW2400’s
[OMNI OUT] jacks, [DIGITAL STEREO OUT] connector, and the output channels of an I/O card
installed in the I/O slot.
To call this page press the Work Navigate section
[PATCH] key.
This page contains the following items.
1 OMNI OUT ASSIGN field
Move the cursor to fields 1–4 and use the [DATA/JOG]
dial or the [INC]/[DEC] keys to select the signal that will
be assigned to each [OMNI OUT] jack. Press the
[ENTER] key to finalize your selection.
You have the following choices.
B OPTION I/O SLOT OUT ASSIGN field
Move the cursor to fields 1–16 and use the [DATA/JOG]
dial or the [INC]/[DEC] keys to select the signal that will
be assigned to each output channel of a digital I/O card
installed in the I/O slot. Press the [ENTER] key to finalize
your selection.
You have the following choices.
*1. “INS” will appear only if SLOT1–SLOT16 is selected for INSERT
EFF in the CH VIEW screen View page. If you attempt to change
“INS” to a different item in the PATCH screen Output page, a popup
message (“Used As Effect Insert!”) will appear, and you won’t be
able to execute the change. In order to change this, you will first
have to defeat the selection for the corresponding output channel in
the CH VIEW screen View page.
C D.ST OUT ASSIGN field
Move the cursor to this field and use the [DATA/JOG] dial
or the [INC]/[DEC] keys to select the signal that will be
assigned to the [DIGITAL STEREO OUT] connector.
Press the [ENTER] key to finalize your selection.
You have the following choices.
Output signal patching
Display Type of signal
--- No assignment
ST L/ST R Stereo output channel L/R
AUX 1–4 AUX send master 1–4
EFF 1–4 Effect send master 1–4
TR 1–24 Track channel direct outputs 1–24
Display Type of signal
--- No assignment
ST L/ST R Stereo output channel L/R
AUX 1–4 AUX send master 1–4
EFF 1–4 Effect send master 1–4
TR 1–24 Track channel direct outputs 1–24
INS
*1
Insert send
B
C
A
Display Type of signal
--- No assignment
ST L&R Stereo output channel L&R
AUX 1&2, 3&4 AUX send master 1&2, 3&4
EFF 1&2, 3&4 Effect send master 1&2, 3&4
TR 1&2–23&24 Track channel direct outputs 1&2–23&24
• The signal of the stereo bus is always assigned to the [STEREO
OUT] jacks.
HINT