Filter
Top Products
AW2400 Owner’s Manual
Using the MIDI Remote function
MIDI
206
20
● XG 1–16
● XG 17–32
● XG 33–48
● XG 49–64
These presets let you use the AW2400 as a volume con-
troller for an XG tone generator. Each preset will control
the XG-compatible tone generator’s parts 1–16, 17–32,
33–48, and 49–64 respectively.
• [ON] key operations will switch the part on/off.
•Fader operations will control the volume of the part.
● USER1
● USER2
● USER3
● USER4
These 4 presets can be set up by the user. Refer to “Using
User-defined Remote function”.
B TRANSPORT field
Select one of the following to specify how the transport
section keys will function while using the MIDI Remote
function.
• NORMAL button...... The transport keys will perform
their normal functions: play, stop,
or locate etc. for the current
song. MTC/MMC/MIDI Clock
messages will be transmitted and
received as specified in the MIDI
screen Setting 2 page.
• LOCAL button.......... The transport keys will play, stop,
or locate the current song. How-
ever, MTC/MMC/MIDI Clock
messages will not be transmitted
or received.
• REMOTE button....... The transport keys will not oper-
ate the recorder, but will only
transmit the MIDI messages that
have been preset for each key.
C ON field
D FADER field
This field is used when setting up a user-defined preset.
The REMOTE screen 1–12 page and 13–16 page let you
assign your own MIDI messages to each fader and [ON]
key.
To call the REMOTE screen 1–12 page (or 13–16 page)
press the Layer section [REMOTE] key as many times as
necessary, or press the [F1] key (or [F2] key) after press-
ing the [REMOTE] key.
1 Fader/[ON] key function name
Displays the name that is assigned to the currently dis-
played fader or [ON] key.
B RENAME button
Edits the name that is assigned to the fader/[ON] key.
Move the cursor to the button and press the [ENTER] key,
and the NAME EDIT popup window will appear.
C LATCH/UNLATCH button
Selects one of the following types of operation for the
[ON] keys.
•LATCH............. The setting will alternate on/off each
time you press the [ON] key.
• These settings will also apply if you use a foot switch to operate
the song transport.
HINT
Using User-defined Remote
function
• USER1–USER4 must be selected in the MODE box in order to set
up user-defined assignments.
NOTE
CBDE
A
MIDI data transmitted
(SW=7F)
MIDI data
transmitted (SW=00)
off
on
off