Filter
Top Products
AW2400 Owner’s Manual
Pan Control
Pan, EQ, and Dynamics Processing
148
16
4
The panning for paired channels can be
adjusted in three different ways: hold the
Display section [SHIFT] key while pressing
the [F1], [F2], or [F3] key.
• [F1] key — INDIVIDUAL
The pan positions of the paired
channels can be adjusted individ-
ually.
• [F2] key — GANG
The pan positions of the paired
channels are adjusted simulta-
neously in the same direction,
maintaining the relative posi-
tions of each channel.
• [F3] key — INV.GANG
The pan positions of the paired
channels are adjusted simulta-
neously in opposite directions.
Adjusting pan via Selected Channel section knob 1.
1
Use the Layer section, [INPUT SEL], [SEL],
and [STEREO SEL] keys to select the chan-
nel for which pan is to be controlled.
2
Press the Selected Channel section [PAN/
EQ] key so that its indicator lights.
With the default settings the PAN/EQ screen will
appear automatically. The display will not change if
the UTILITY screen Preference page AUTO DIS-
PLAY button is set to OFF.
3
Rotate Selected Channel knob 1 to adjust
the pan of the channel selected in step 1.
If the UTILITY screen Preference
page AUTO DISPLAY button is set
to OFF, a popup window showing
the current pan setting will appear
while knob 1 is being operated.
• This operation can be accessed via both the Input/RTN and
Track pages, and affects both pages.
HINT
■ Pan Control via
the Selected Channel section