Filter
Top Products
AW2400 Owner’s Manual
Handy Recording Functions
Track recording
64
6
By using the AW2400’s Undo list, you can not only cancel
the most recent recording or editing operation, but even
backtrack through your work for as many as fifteen opera-
tions.
This is convenient when, for example, after performing
several overdubs you decide that you would rather go back
to the state immediately after you had recorded the third
solo.
1
Press and hold the [UNDO/REDO] key.
The UNDO LIST popup window will appear.
1 Undo list
This is a list of the previous recording and editing
operations. From the left, the list shows a step number
that indicates the order in which the operations were
performed, the content of the operation, and the track/
virtual track that was affected by the recording or edit-
ing operation.
The current song is now in the state of the step that is
highlighted.
The step enclosed by a dotted frame indicates the step
to which the song will be returned by the Undo func-
tion.
2
Use the [DATA/JOG] dial or [INC]/[DEC]
keys to select a step number.
3
Move the cursor to the OK button and press
the [ENTER] key.
The current song will revert to the state of the step you
selected.
4
Move the cursor to the EXIT button and
press the [ENTER] key.
The popup window will close, and you will return to
the previous screen.
Using the Undo List
A
• If you have already cancelled recent operations using the
Undo function before displaying the Undo list, previous steps
may not remain at all.
NOTE
• Please note that if you record or edit after “undoing” back to a
certain step, the undo/redo data subsequent to that step will
be erased. For example if you “undo” the previous three
steps, and then perform a recording or editing operation, the
undo/redo data for the previous steps 1 and 2 will be erased.
• If you press the [UNDO/REDO] key while it is lit the previous
operation will be undone without opening the Undo List (the
key indicator will go out when the UNDO operation is per-
formed). Press the [UNDO/REDO] key a second time to
“redo” the undone operation.
HINT