Filter
Top Products
AW2400 Owner’s Manual
Playing back the stereo track
Mixdown and bounce operations
78
8
When you’ve finished the mixdown, you can play back the stereo track as follows.
1
Call the TRACK screen Stereo TR page by
either pressing the Work Navigate section
[TRACK] key as many times as necessary,
or by pressing the [F3] key after pressing
the [TRACK] key.
2
Switch the ST TR MODE ON/OFF button ON.
When this button is on, the stereo track output will be
sent to a point directly before the [STEREO] fader,
and can be monitored from the [STEREO OUT] jack,
the [MONITOR OUT] jack, or the [PHONE] jack. At
this time, the record-ready status of all tracks will be
cancelled.
3
Press the RTZ [ ] key to rewind the song,
and press the PLAY [ ] key.
The stereo track will be played back. Use the [STE-
REO] fader to adjust the monitor level.
4
When you are ready to return to normal
recording/playback of the audio tracks,
switch the ST TR MODE ON/OFF button off.
Playing back the stereo track
ST TR MODE ON/OFF button
• If any audio tracks are in record-ready mode, a popup window
will ask you to confirm that you want to defeat the record-
ready status. If you want to play back the stereo track, move
the cursor to the OK button and press the [ENTER] key.
HINT
• The EQ and dynamics processor of the stereo output channel
are disabled while the stereo track is playing back.
NOTE