Filter
Top Products
AW2400 Owner’s Manual
Writing audio data
Creating an audio CD
218
22
7
Move the cursor to the WRITE button and
press the [ENTER] key.
A popup window will ask you to confirm.
8
To begin writing the disc, move the cursor
to the OK button and press the [ENTER]
key.
A popup window will indicate “CD Writing...” while
data is being written to the disc. When writing is com-
pleted, a popup window will ask you whether you
want to finalize.
9
To finalize the disc, move the cursor to the
OK button and press the [ENTER] key.
If you do not want to finalize the disc, move the cursor
to the CANCEL button and press the [ENTER] key.
This completes the writing process.
Here’s how to use the Disc At Once method to write stereo
tracks from songs saved on the hard disk to CD-R/RW
media. Use this method if you do not want to create
silence between each track of the CD, or if you want to
write a single song divided into multiple tracks on the CD.
1
Make sure that the appropriate virtual track
is selected for the stereo track of the
song(s) you want to write.
2
If you want to divide the song into CD
tracks at the marker locations specified
within the song, check that markers have
been set at the appropriate locations.
3
Call the CD screen Write page by either
pressing the Work Navigate section [CD]
key as many times as necessary, or by
pressing the [F1] key after pressing the
[CD] key.
4
Move the cursor to DISC AT ONCE and
press the [ENTER] key.
The CD-RW disc inserted in the drive will automati-
cally be checked.
5
Move the cursor to the ADD button and
press the [ENTER] key.
The track list will show information (track number/
song name/size of the stereo track) for the song that
will be written to track 1 of the CD.
• Pressing the [F4] key while holding the Display section
[SHIFT] key has the same effect as the WRITE button.
HINT
•A “BUFFER UNDERRUN!” error message will appear if a
buffer underrun occurs while writing. In this case, either
decrease the writing speed to 4x or set the UNDERRUN
PROTECT button to ENABLE (
→
p. 215).
• If you enabled the write test in “Basic settings for the CD-RW
drive” (
→
p. 215), a write test will be performed before the
data is actually written. An error message will appear if a
problem occurs during the write test.
• Copy-prohibit data will automatically be written into the CD
that is created.
NOTE
Writing Disc At Once
• If data has already been written on the CD-RW disc that you
insert, a popup window will appear immediately after step 4
asking whether you want to erase the data. Move the cursor
to the OK button if you want to erase the entire disc, or to the
CANCEL button if you want to cancel execution. Then press
the [ENTER] key.
HINT
• When you move the cursor to the ADD button and press the
[ENTER] key, a new song will be added following the existing
songs.
• By using the INSERT button instead of the ADD button, you
can insert a new song immediately before the song that is
selected in the list.
•You can use the DELETE button to delete the currently
selected song from the track list.
HINT