Filter
Top Products
AW2400 Owner’s Manual
EQ/Dynamics Processor Library Operation
Pan, EQ, and Dynamics Processing
154
16
The AW2400 includes “setup libraries” that contain preset EQ, gate, and compressor settings
that can be recalled and used in a variety of situations. The libraries can also be used to store
your own settings for easy recall as needed.
This section describes the procedure for accessing the EQ/
Dynamics Library screens and recalling library presets.
From this library you can recall EQ settings to the cur-
rently selected channel. Of library numbers 001–128,
numbers 001–040 are read-only, and 041–128 can be used
to store your own settings.
EQ library operations are performed via the PAN/EQ
screen EQ Lib. page.
1
Use the Layer section, [INPUT SEL], [SEL],
and [STEREO SEL] keys to select the target
channel.
2
Press the Selected Channel section [PAN/
EQ] key so that its indicator lights, then
press Selected Channel knob 2, 3, or 4.
The PAN/EQ screen will appear.
3
Press the Display section [F2] key, or press
the [PAN/EQ] key as many times as neces-
sary until the EQ Lib. page appears.
The EQ Lib. page includes the following items.
1 Current Response Curve
A graphic representation of the current EQ curve for
the currently selected channel.
B Output Meter
Displays the signal level after the EQ stage.
C EQ Curve
A graphic representation of the EQ curve of the cur-
rently selected EQ setting in the library list.
D List
A list of all the settings stored in the library. The row
highlighted by a dotted frame is the setting currently
selected for operation. An icon indicates read-only
library settings.
E Buttons
These buttons execute the RENAME, RECALL,
STORE, and CLEAR functions. Detailed description
of their operation begins on page 156.
From this library you can recall gate settings to the cur-
rently selected input channel. Of library numbers 001–
128, numbers 001–004 are read-only, and 005–128 can be
used to store your own settings.
Gate library operations are performed via the DYNAM-
ICS screen Gate Lib. page.
1
Use the Layer section, [INPUT SEL] and
[SEL] keys to select the target channel.
2
Press the Selected Channel section [DYN]
key so that its indicator lights, then press
Selected Channel knob 1, 2, 3, or 4.
The DYNAMICS screen will appear.
EQ/Dynamics Processor Library Operation
• If necessary library recall can be automated using the AW2400’s Automix record/playback
capabilities (
→
p. 181).
HINT
Accessing the EQ/Dynamics
Library screens
■ Recalling EQ Library settings
BC
D
A
E
• When a TYPE II EQ library preset is recalled to a channel
that only allows TYPE
I EQ (the input channels, effect return
channels, and AUX channels), the EQ preset will be recalled
as TYPE
I EQ.
NOTE
■ Recalling Gate Library settings