Filter
Top Products
41
AW2400 Owner’s Manual
Listening to the demo song
4
Chapter 4
Listening to the demo song
When the AW2400 is shipped from the factory, its hard disk contains a demo song. This chapter
explains how to load and play back the demo song.
Here’s how to load the demo song from the hard disk.
1
Press the Work Navigate section [SONG]
key.
The SONG screen will appear, where you can save or
load songs.
2
Call the Song List page by either pressing
the [SONG] key as many times as neces-
sary, or by pressing the [F1] key after
pressing the [SONG] key.
In this page, you can select a song on the hard disk,
and load or delete it.
1 Song list
This area lists the songs that are saved on the hard
disk. The line enclosed by the dotted frame in the cen-
ter of the list indicates the song that is selected for
operations. The highlighted line indicates the song that
is currently loaded into the AW2400. (This is called
the “current song.”)
B LOAD button
Loads the selected song.
3
Move the cursor to the song list, and then
use the [DATA/JOG] dial or [INC]/[DEC] keys
to select the song “The_Only_One.”
4
Move the cursor to the LOAD button in the
screen, and press the [ENTER] key.
A popup window like the following will appear. This
window asks you whether you want to save the current
song.
5
Move the cursor to either YES (save the cur-
rent song) or NO (don’t save the current
song), and press the [ENTER] key.
The song data will be loaded, and “The_Only_One”
will become the current song.
“You’re the Only One”
© Timothy Akers
Loading the demo song
B
A
• Each row of the list will display the song name, data size, bit
depth (16/24 bit), and sampling rate (44.1/48 kHz).
NOTE
• If you select NO, any changes that you made to the current
song since you last saved it will be lost.
NOTE